Undergraduate Program for Mechanical Engineering of Jiangsu University
Length of Schooling
Key Courses
The key courses throughout 4 years are listed as follows:
Mechanics |
Engineering Graphics |
Theory and Design of Machines and Mechanisms |
Electrotechnics & Electronics |
Engineering Materials and Their Processing Fundamentals |
Tolerance and Its Test Techniques |
Basics of Mechanical Manufacturing Techniques |
Design of Mechanical Manufacturing Equipments |
Fundamentals and Applications of Single-Chip Microcomputers |
Hydraulic and Pneumatic Transmission |
Electromechanical Transmission Control |
|
Objectives
Combined with the common knowledge education, professional education, engineering science education and industrial practice training, the main objectives of this multidisciplinary undergraduate program (mainly covering the fields of mechanics, mechanical science, materials, electronics, electromechanical control technology, detection technique, computer-aided engineering) aim to develop/improve the students’ ability and support/benefit their future career development (e.g., senior engineers and technicians, outstanding researchers and scholars, etc.) due to the solid and interdisciplinary engineering background, the creative inspiration and ability, as well as the strong ability for actual engineering applications through studying at the School of Mechanical Engineering, Jiangsu University.
Requirements
The knowledge background of this program mainly consists of mechanical manufacturing and automation, mechanical design and automation.
Except the general requirements (e.g., respect and obey the relevant rules/regulations from Chinese government and Jiangsu University, respect the faculty and Chinese traditions/customs, be in good health condition, etc.), the students are required to have the knowledge background in natural, human, art and social sciences especially familiar with the computer-aided programming/design and proficient in both oral and written English, and they are also required to know the basic fundamentals, professional knowledge, and technical applications of the related fields in mechanical engineering and its automation technique (mainly including mechanics, mechanical science, materials, electronics, electromechanical control technology, detection technique, computer-aided engineering, and enterprise management), with potential ability and knowledge to design and manufacture electromechanical products, industrial product development, technical innovation , and enterprise management.
Moreover, the students for this program are required to have the relevant basic technical/professional skills and ability for design, calculation, analysis, detection, and operation, and knowing of frontier knowledge, applications and future research/development trend in mechanical engineering will be a plus. In addition, the students should have the ability to analyze and solve the actual engineering problems using the knowledge and techniques they have learnt and known. They are required to have the relative strong ability to self-study with innovative inspiration and collaborative spirit.
Type A Courses (core courses)
No. |
School |
Name of Course |
Term |
Credit |
Total Hours |
Theory Hours |
Practice Hours |
Required Elective |
|
SLA |
Survey of Chinese Culture 中国文化概论 |
1 |
2 |
64 |
32 |
32 |
Required |
|
SLA |
Chinese-I 汉语-I |
1 |
4 |
64 |
64 |
0 |
Required |
|
SLA |
Chinese-II 汉语-II |
2 |
2 |
32 |
32 |
0 |
Required |
|
SLA |
Chinese-III 汉语-III |
3 |
2 |
32 |
32 |
0 |
Required |
|
FS |
Advanced Mathematics A(I) 高等数学A A(I) |
2 |
5 |
80 |
80 |
0 |
Required |
|
FS |
Advanced Mathematics A(I) 高等数学A A(I) |
3 |
5 |
80 |
80 |
0 |
Required |
|
FS |
Linear Algebra 线性代数 |
4 |
2 |
32 |
32 |
0 |
Required |
|
FS |
Statistics and Probability Theory 概率统计 |
4 |
3 |
48 |
48 |
0 |
Required |
|
FS |
Computational Method 计算方法 |
5 |
2 |
32 |
32 |
0 |
Required |
|
FS |
Physics A(I) 大学物理A(I) |
2 |
3.5 |
56 |
56 |
0 |
Required |
|
FS |
Physics A(II) 大学物理A(II) |
3 |
3.5 |
56 |
56 |
0 |
Required |
|
FS |
Physics Experiment A(I) 大学物理实验A(I) |
2 |
1 |
32 |
0 |
32 |
Required |
|
FS |
Physics Experiment A(II) 大学物理实验A(II) |
3 |
0.5 |
16 |
0 |
16 |
Required |
|
SCCE |
Engineering Chemistry 工程化学 |
2 |
2 |
32 |
32 |
0 |
Required |
|
SCSTE |
PC Program Design (C Language) 程序设计(C语言) |
3 |
3 |
64 |
32 |
32 |
Required |
|
Library |
Information Retrieval 文献检索 |
2 |
1 |
16 |
10 |
1 |
Required |
|
SD |
Physical training -I 体育-I |
1 |
1 |
36 |
32 |
4 |
Elective |
|
SD |
Physical training -II 体育-II |
2 |
1 |
36 |
32 |
4 |
Elective |
|
SD |
Physical training -III 体育-III |
3 |
1 |
36 |
32 |
4 |
Elective |
|
SD |
Physical training -IV 体育-IV |
4 |
1 |
36 |
32 |
4 |
Elective |
|
|
Total A |
|
41.5 |
|
|
|
|
Type B Courses (professional courses)
No. |
School |
Name of Course |
Term |
Credit |
Total Hours |
Theory Hours |
Practice Hours |
Required Elective |
B1 |
SME |
Introduction to Mechanical Engineering 机械工程导论 |
2 |
1 |
16 |
16 |
0 |
Required |
B2 |
SME |
Engineering Graphics A(I) 工程图学A A(I) |
2 |
3.5 |
56 |
56 |
0 |
Required |
|
SME |
Engineering Graphics A(II) 工程图学A A(II) |
3 |
4 |
64 |
48 |
16 |
Required |
B3 |
FCEM |
Engineering Mechanics A A(I) 工程力学A A(I) |
3 |
4 |
64 |
64 |
0 |
Required |
|
FCEM |
Engineering Mechanics A A(II) 工程力学A A(II) |
4 |
3.5 |
56 |
56 |
0 |
Required |
B4 |
FCEM |
Engineering Mechanics Experiment 工程力学实验 |
4 |
0.5 |
16 |
0 |
16 |
Required |
B5 |
SEPE |
Fluid Dynamics 流体力学 |
4 |
2.5 |
40 |
34 |
6 |
Required |
B6 |
SEPE |
Fundamentals of Heat Transfer Theory 传热学基础 |
5 |
2.5 |
40 |
34 |
6 |
Required |
B7 |
SEIE |
Electrotechnics & Electronics A(I) 电工电子学A(I) |
4 |
2.5 |
40 |
40 |
0 |
Required |
|
SEIE |
Electrotechnics & Electronics A(II) 电工电子学A(II) |
5 |
2.5 |
40 |
40 |
0 |
Required |
B8 |
SEIE |
Experiments for Electrotechnics & Electronics A 电工电子学实验A |
5 |
0.5 |
16 |
0 |
16 |
Required |
B9 |
SME |
Theory and Design of Machines and Mechanisms A(I) 机械原理及设计A(I) |
4 |
3 |
48 |
48 |
0 |
Required |
|
SME |
Theory and Design of Machines and Mechanisms A(II) 机械原理及设计A(II) |
5 |
3 |
48 |
48 |
0 |
Required |
B10 |
CIT |
Theory and Design of Machines and Mechanisms 机械原理及设计实验 |
5 |
0.5 |
16 |
0 |
16 |
Required |
B11 |
SME |
Engineering Materials and Their Processing Fundamentals 工程材料及其成型基础 |
5 |
4 |
64 |
58 |
6 |
Required |
|
SME |
Basics of Mechanical Manufacturing Techniques A 机械制造技术基础A |
6 |
5 |
64 |
56 |
8 |
Required |
B12 |
SME |
Tolerance and Its Test Techniques 公差与检测技术 |
5 |
2.5 |
40 |
32 |
8 |
Required |
B13 |
SME |
Single Chip Computer 单片机原理及应用 |
6 |
2.5 |
40 |
34 |
6 |
Required |
|
|
Total B-1 |
|
45 |
|
|
|
|
|
SME |
Mechanics CAD 机械CAD |
6 |
2 |
32 |
26 |
6 |
Elective |
|
SME |
Numerical Control Principles & Programming Techniques 数控原理及编程技术 |
6 |
2 |
32 |
26 |
6 |
Elective |
|
SME |
Quality Management and Control 质量管理与控制 |
6 |
2 |
32 |
32 |
0 |
Elective |
|
SME |
Finite Element Numerical Analysis for Engineering 工程有限元分析 |
6 |
2 |
32 |
26 |
6 |
Elective |
|
SME |
Mechanical Optimum Design 机械优化设计 |
6 |
2 |
32 |
28 |
4 |
Elective |
|
|
Total B-2 |
|
4 |
|
|
|
|
|
|
Total B |
|
49 |
|
|
|
|
Type C Courses：Elective Credits
No. |
School |
Name of Course |
Term |
Credit |
Total Hours |
Theory Hours |
Practice Hours |
Required Elective |
|
SME |
Hydraulic and Pneumatic Transmission 液压与气压传动 |
5 |
2.5 |
40 |
32 |
8 |
Required |
|
SME |
Fundamentals of Control Engineering 控制工程基础 |
6 |
2.5 |
40 |
34 |
6 |
Required |
|
SME |
Electromechanical Transmission Control 机电传动控制 |
6 |
2.5 |
40 |
34 |
6 |
Required |
|
SME |
Detection Techniques for Mechanical Engineering 机械工程测试技术 |
6 |
2.5 |
40 |
34 |
6 |
Required |
|
SME |
Design of Mechanical Manufacturing Equipments 机械制造装备设计 |
7 |
2.5 |
40 |
38 |
2 |
Required |
|
CIT |
Speciality Comprehensive Experiments 机械专业综合实验 |
7 |
0.5 |
16 |
0 |
16 |
Required |
|
|
Total C-1 |
|
14.5 |
|
|
|
|
|
SME |
Numerical Design & Manufacturing Technique 数字化设计与制造技术 |
7 |
2 |
32 |
32 |
0 |
Elective |
|
SME |
Robots Engineering 机器人工程 |
7 |
2 |
32 |
30 |
2 |
Elective |
|
SME |
Stamping Process and Mould Design 冲压工艺与模具设计 |
7 |
2 |
32 |
30 |
2 |
Elective |
|
SME |
Precision and Laser Processing 精密与激光加工 |
7 |
2 |
32 |
28 |
4 |
Elective |
|
SME |
Design of Mechanical System 机械系统设计 |
7 |
1.5 |
24 |
24 |
0 |
Elective |
|
SME |
Seminars of Mechanical Engineering 机械工程前沿讲座 |
7 |
1.5 |
24 |
24 |
0 |
Elective |
|
SME |
Modern Manufacturing Technology 先进制造技术 |
7 |
1.5 |
24 |
24 |
0 |
Elective |
|
SME |
Mechanical Manufacturing Automation 机械制造自动化 |
7 |
1.5 |
24 |
24 |
0 |
Elective |
|
SME |
Plastic Molding Process and Mould Design 塑料成型工艺与模具设计 |
7 |
1.5 |
24 |
24 |
0 |
Elective |
|
SME |
Extrusion Process and Mould Design 压铸工艺及模具设计 |
7 |
1.5 |
24 |
24 |
0 |
Elective |
|
SME |
Mechanical Motion Control Technology 机械运动控制技术 |
7 |
1.5 |
24 |
24 |
0 |
Elective |
|
SME |
Foundation of Mechanical Vibration 机械振动基础 |
7 |
1.5 |
24 |
24 |
0 |
Elective |
|
SME |
Computer Graphics 计算机图形学 |
7 |
1.5 |
24 |
24 |
0 |
Elective |
|
SME |
Microelectromechanical Systems (MEMS) 微机电系统 |
7 |
1.5 |
24 |
24 |
0 |
Elective |
|
SME |
Machinery Fault Diagnosis Technology 机械故障诊断技术 |
7 |
1.5 |
24 |
24 |
0 |
Elective |
|
SME |
Modern Functional Materials 现代功能材料 |
7 |
1.5 |
24 |
24 |
0 |
Elective |
|
|
Modernization Management of Equipment 设备现代化管理 |
7 |
1.5 |
24 |
24 |
0 |
Elective |
|
|
Total C-2 |
|
10 |
|
|
|
|
|
|
Total C |
|
24.5 |
|
|
|
|
Type D Courses: Practice
No. |
Name of Course |
Term |
Credit |
Weeks |
Remark |
D2 |
Basic Engineering Training I 基础工程训练Ⅰ |
2 |
1 |
1 |
|
D3 |
Basic Engineering Training II 基础工程训练Ⅱ |
3 |
4 |
4 |
|
D4 |
Basic Engineering Training III 基础工程训练Ⅲ |
4 |
2 |
2 |
|
D5 |
Machine Shop Practice 生产实习 |
6 |
2 |
2 |
|
D6 |
Course Design for Engineering Graphics 工程图学课程设计 |
3 |
1 |
1 |
|
D7 |
Integrated Course Design for Mechanical Design I 机械设计综合课程设计I |
4 |
1 |
1 |
|
D8 |
Integrated Course Design for Mechanical Design II 机械设计综合课程设计II |
5 |
2 |
2 |
|
D9 |
Course Design for Electromechanical Control System 机电控制系统课程设计 |
6 |
2 |
2 |
|
D10 |
Basic Course Design for Mechanical Manufacturing Techniques 机械制造技术基础课程设计 |
7 |
3 |
3 |
|
D11 |
Integrated Technical Practice 专业综合实践 |
7 |
3 |
3 |
|
D12 |
Graduation Design (Thesis) 毕业设计（论文） |
8 |
14 |
16 |
|
|
Total D |
|
35 |
|
|
The Allocation of Credits and course ( Attachment Ⅱ )
Remark:
Minimum Credits Required：
For required courses:
For elective courses:
For practical training:
Total：
