9570金沙登录入口(中国)有限公司·百度百科

　　Name: Bing Zhang

　　Ph. D, Associate professor, Ph. D supervisor

　　Address: Room 605-1, School of Mechanical Engineering

　　Phone: (86)18306102791

　　Fax: /

　　E-mail: zhangbing@ujs.edu.cn

Education

2002-2006 B.S, School of Mechanical Engineering, Jiangsu University, China
2006-2008 M.S. School of Mechatronics Engineering, HIT, China
2006-2008 Ph.D. School of Mechatronics Engineering, HIT, China

Professional Experience

2013-2021 Lecture, Department of Mechanical and Electrical Engineering, Jiangsu University, China
2021-Present Associate professor, Department of Mechanical and Electrical Engineering, Jiangsu University, China

Social Academic Post

Research Interests

1.Vibration control strategy and its application technology: The shaking table (shown in a) is used to provide 6-DOF shaking vibration environment, and the payload may be about 30 ton, the control bandwidth of the shaking system near 100Hz. And the sine, sweep-sine, shock and random shaking experiments can be executed on this table. Figure b) is a test-bed for car shock absorber, which is one DOF shaking table. The control strategies of these shaking table are worth to be researched.

　　(a) 6-DOF shaking table　　　　　　　　　(b) Test-bed of shock absorber
2.Control and application of electro-hydraulic servo system.The hydraulic servo system has been widely used in the industry. The fatigue test-bed is one typical field, such as the flywheel fatigue test-bed. This condition, large torque and long time stable test requirements should be achieved. The test-bed is shown as follows. The test-bed is now continuously running more than 15 days and the frequency of the sine signal is 20Hz. The nonlinear control method of this test-bed will be studied more deeply in the future.

　　　　　　Fatigue test-bed
3.Hydraulic driven Parallel manipulators:The control system of the 6-DOFparallel robot is more comprehensive, how to improve the accurate and the response speed will be the future work.

　　　　　6-DOF parallel robot

Teaching Courses

1. Control engineering (Undergraduate course)
2. Modern Control engineering (Graduate course)
3. Hydraulic and Pneumatic Transmission (Undergraduate course)

Honours and Awards

Main Research Projects

1.Research on the mechanism and compound control strategy of heavy load and long stroke hybrid vibration isolation based on redundant parallel mechanism (No. 51805215), NSFC, 2018-2021.

Main Scientific Publications

1.Zhang Bing; Huang Hua; Cai Jiamin; Jiang Ziliang; Qian Pengfei; Research on the steam valve joystick loading system and its control strategy, IEEE Access, 2020, 8: 34810-34819.
2.Zhang Bing; Wei Wei; Qian Pengfei*; Jiang Ziliang; Li Jiandong; HanJunwei; Mujtaba Muhammad; Research on the control strategy of hydraulic shaking table based on the structural flexibility, IEEE Access, 2019, 7:43063-43075.
3. Zhang Bing; Liu Hongtuo; Xie Fangwei; Wang Cuntang; Research on control system of hydraulic test platform of vehicle shock absorber based on DSP, Recent Patents on Mechanical Engineering, 2018, 11(1): 67-75.
4. Bing Zhang; Muhammad Mujtaba; Pengfei Qian; Jiandong Li; Ziliang Jiang; Fangwei Xie; Cuntang Wang; The adaptive amplitude-phase control for sinusoidal fatigue test of automobile engine flywheel, Journal of Testing and Evaluation, 2019, 49(3).
5. Bing Zhang; Saike Jiang; Ziliang Jiang; Jiandong Li; Kehong Zhou and Feng Liu;Dynamic Analysis and Control Research of a 3-DOF Hydraulic Driven Parallel Mechanism, Recent Patents on Mechanical Engineering, 2020. (accepted)

Patents

Plan for Overseas Master & Ph. D

One Master or Ph.D